Featured Projects

Scott AFB Veterinary Treatment Facility

Mechanical and Plumbing Design

Scott Airforce Base, IL

Scott AFB Veterinary Treatment Facility | Mechanical and Plumbing Design |
Scott Airforce Base, IL

Our services include mechanical and plumbing design for the Veterinary Clinic Building 856 located on Scott Air Force Base. The project consists of approximately 1,700sf of renovation and 1,000sf of addition to the facility.

The new clinic expands on the functional requirements of the facility, and implements the systems upgrades. The project will include total interior renovation of the existing structure with the annexation of new structure to facilitate the program needs.

Johns Hopkins University School
Simulation Center 

Plumbing Design Services

Baltimore, MD

Johns Hopkins University School, Simulation Center | Plumbing Design Services |
Baltimore, MD

Setty’s services for this ongoing project include plumbing design for Johns Hopkins University School CMSC 7, Blablock 7 and CMSC 8.

Scope of work includes:

  • Plumbing Design services.
  • Performing field survey/ site visit of existing engineering systems.
  • Office space shall be core/shell and tenant fit out building.
  • Coordination with Architectural, Mechanical, Electrical, Civil and Structural disciplines for Plumbing Design

New Inova Loudoun Hospital

MEP/FP Design Services

Loudoun County, VA

New Inova Loudoun Hospital | MEP/FP Design Services | Loudoun County, VA

Serving the people of Loudoun for over 100 years, Loudoun Hospital first opened its doors at downtown Leesburg in the year 1912. The Inova Loudoun Hospital Strategic master plan includes new main hospital entrance, better road access, a staff parking lot and new north Patient Tower under the 6 stage new construction renovation project.

SETTY along with Valley Engineering will provide MEP/FP design services in accordance with Mechanical Design conditions stated in the Inova Master Plan.

UMMC
Maxillofacial Surgery Clinic

MEP/FP Engineering services

Baltimore, MD

UMMC Maxillofacial Surgery Clinic Renovation |
MEP/FP Engineering services | Baltimore, MD

The University of Maryland Medical Center (UMMC) has the need to renovate and consolidate two Clinic spaces in our North Hospital, Ground floor. The clinics (Surgical and Oral Maxiofacial) are dated and inefficient. The Oral Maxiofacial (OMFS) clinic is currently housed in approximately 3,400 SF and is planned to be relocated to an offsite facility with some accommodation for that program to be incorporated into an expanded Surgical clinic.  

The Surgical clinic is currently housed in approximately 4,450SF and has the need for a combined total of six to eight Exam Rooms, a Dental X-Ray Room and two Minor Procedure Rooms. There exists approximately 1,500 square feet of adjacent space that may be considered for expansion.  

Under this project, SETTY is providing MEP/FP Engineering services.

Victorian Comprehensive Cancer Centre (VCCC) Melbourne

MEP/FP Revit Coordination

Victoria, Australia

Victorian Comprehensive Cancer Centre (VCCC) Melbourne |
MEP/FP Revit Coordination | Victoria, Australia

The new, 915,850 SF facility purpose-built for cancer research, treatment and care in the Melbourne suburb of Parkville, Victoria. The VCCC Project will assist building partners to accelerate the discovery of new cancer treatments, attract the nation’s leading cancer researchers and provide a centre of excellence for people affected by cancer.

SETTY provided MEP/FP Revit coordination and Mechanical BIM Model in Revit 2014 format.  

National Institutes of Health
Building 10
Clinical Pathology Department

HVAC Renovation

Bethesda, MD

National Institutes of Health, Building 10, Clinical Pathology Department |
HVAC Renovation | Bethesda, MD

National Institutes of Health has supported and witnessed many important health and medical discoveries of the last century that resulted from research. NIH translates research results into interventions and communicates research findings to patients and their families, health care providers and the general public.

SETTY was contracted for a 40,000 sf renovation project that encompasses replacement of the air handling units and developing a heating system.

USACE:

Walter Reed Army Medical Center

Renovations + Design-Build

Washington, DC

U.S. Army Corps of Engineers (USACE), Walter Reed Army Medical Center | 
Design-Build Services + DDC | Washington, DC

Setty's Architectural, Mechanical, Electrical, Plumbing, and Fire Protection team members provided various design-build services for the four buildings at Walter Reed Army Medical Center.

Scope of services included:

Fitness Center

  • Conversion of HVAC controls to DDC (digital), interfacing with a central system for central control, monitoring, and energy conservation.
  • Replacement of hot water heat exchanger.
  • Provided new design for HVAC distribution ductwork and air diffusers.

Patient Care Garage

  • Replacement of electric panels and distribution system.
  • Replacement of garage exhaust system.
  • Replacement of drain water ejection pumps.

Rumbaugh Garage

  • Integrated electrical work as needed to implement mechanical and plumbing design.
  • Installed additional emergency lights and exit lights to meet code specifications.
  • Installed emergency telephone system.
  • Replacement of fire alarm system to comply with code.

Chapel

  • Provided new DDC controls for HVAC system.
  • Replacement of two exterior condensing units.
  • Provided new steam heating pipes at AHU.
  • Replacement of electrical service equipment and associated panel boards, conduit, and wiring.

 

DOVA:

Perry Point VA Medical Center 

Repair HVAC Systems Buildings 

Perry Point, MD

DOVA: Perry Point VA Medical Center | Repair HVAC System Buildings 3H, 4H & 5H |
Perry Point, MD

Setty is providing MEP/FP design services, technical specifications, working drawings, cost estimates, as-built drawings, construction administration services, and site visits for the VA Medical Center in Perry Point, MD. We are also providing a complete design for the construction of a new heating, ventilation and air conditioning system for Buildings 3H, 4H and 5H of the facility, with an Engineering Analysis Report (EAR) to include energy conservation, plumbing and sanitary, electrical, architectural and cost estimates.

 

Albert Einstein College of Medicine of Yeshiva College – CERC

MEP/FP Design Services

Bronx, NY

Albert Einstein College of Medicine of Yeshiva College – CERC |
MEP/FP Design Services | Bronx, NY

The Children's Evaluation and Rehabilitation Center (CERC) at the Albert Einstein College of Medicine provides clinical services for infants, children, and adolescents on physical, developmental, language and learning disabilities. CERC is a major component of the Rose F. Kennedy University Center for Excellence in Developmental Disabilities Education, Research and Service (UCEDD).

SETTY provided various services at Yeshiva University’s Albert Einstein College of Medicine

Scope of Work:

  • MEP/FP design for 8,221 sf of Clinical Research and Office Space including Medical, Dental, and hearing testing facilities to the Van Etten Building for Children’s Evaluation and Rehabilitation Center.
  • MEP/FP design for the Dental Suite including compressed air, water, HVAC, Electrical and Oxygen.
  • New Chilled Water HVAC System including Exhaust Systems.
  • New Lighting, Power, Data, Security and CCTV Systems.
  • New Plumbing Systems.
  • Pool Elimination Study.